Description

Farm Gate Bolt-Through Hinge Set with Drop Latch – General Purpose Pack

Designed for installation on suitable larger timber posts and 100mm strainers, the set features a 16mm × 300mm threaded top through-post hinge with a 10mm thick backing plate, a bolt through bottom gudgeon, and a bolt-on 12mm drop latch and catch.

The single-hole top hinge design makes installation straightforward while providing a strong, stable mounting point for rural, paddock and livestock gates.

KEY FEATURES

• Complete general-purpose farm gate hinge and latch pack
• 16mm × 300mm threaded top through-post hinge
• 10mm thick backing plate helps distribute the gate load across the post
• Bolt Through bottom gudgeon
• Bolt-on 12mm drop latch and matching catch
• Single-hole top hinge installation
• Long hinge pin helps reduce the risk of the gate lifting free
• Galvanised steel construction
• Suitable for larger timber and 100mm steel gate posts
• Designed for rural, agricultural and general farm gates

WHAT IS INCLUDED?

• 1 × 16mm × 300mm threaded top through-post hinge
• 1 × backing plate
• 1 × bolt through-in bottom gudgeon
• 1 × bolt-on 12mm drop latch

Gate, posts and any fasteners not specifically listed are not included.

FARM GATE BOLT-THROUGH HINGE SET

A sagging, unstable or difficult-to-hang gate wastes time every time you move livestock, machinery or vehicles through it.

This General Purpose Farm Gate Bolt-Through Hinge Set provides the essential hinge and latch components needed to hang and secure a rural gate on a suitable posts.

The top hinge passes through a single drilled hole in the gate post and is supported by a backing plate. This creates a secure connection and helps distribute pressure across the post rather than concentrating the load around a small mounting point.

A bolt through-in bottom gudgeon supports the lower end of the gate, while the included 12mm bolt-on drop latch provide a simple way to close and secure the gateway.

The result is a practical gate-hanging system designed for straightforward installation, dependable operation and long-term rural use.

WHY CHOOSE A BOLT-THROUGH GATE HINGE?

 This bolt-through top and bottom hinge requires simple correctly positioned holes through the post.

Once the hinge passes through the post, the backing plate and mounting hardware secure it in position. The threaded shaft also allows the hinge position to be adjusted during installation to help align the gate correctly.

This design is particularly useful for larger posts where a secure through-post connection is preferred.

STRONG THROUGH-POST CONNECTION

The 16mm top hinge has a 300mm threaded length, allowing it to pass through a suitably sized gate post.

The included 10mm thick backing plate helps spread the load over a broader section of the post. This provides greater support than relying on the hinge thread alone and helps create a stable mounting point for the gate.

LONG HINGE PIN FOR BETTER GATE RETENTION

The extended top hinge pin provides greater engagement with the gate hinge eye. This helps reduce the possibility of the gate lifting or working free from the hinge during normal use.

The design also provides flexibility when positioning the gate, making it easier to achieve suitable ground clearance without placing the lower fixing unnecessarily close to ground level.

GALVANISED FOR RURAL CONDITIONS

The gate hinge components are made from galvanised steel to improve resistance to rust and corrosion in outdoor agricultural environments.

Galvanised threads provide additional protection around an area that can be vulnerable to weather exposure and handling during installation.

As with all galvanised farm hardware, service life will depend on installation, environmental exposure, chemical contact, maintenance and local conditions.

SUITABLE APPLICATIONS

This general-purpose gate hinge kit is suitable for:

• Farm and paddock gates
• Livestock gateways
• Cattle and sheep yards
• Rural property entrances
• Machinery access gates
• Laneway gates
• Boundary and internal fencing
• New gate installations
• Replacement of compatible gate hardware

HOW TO INSTALL THE BOLT-THROUGH GATE HINGE

1. Position the gate against the post and determine the required hinge height and ground clearance.
2. Mark the position of the top and bottom through-post hinge.
3. Drill a correctly sized 18mm, level holes through the centre of the post.
4. Pass the 16mm × 300mm threaded hinge through the post.
5. Fit the backing plate and appropriate mounting hardware.
6. Position and install the bolth through-in bottom gudgeon so it aligns with the gate hinge eyes.
7. Hang the gate and adjust the top hinge until the gate sits level and swings freely.
8. Bolt the 12mm drop latch onto the gate.

Installation requirements vary according to gate weight, post size, ground conditions and fencing design. Always ensure that the post and hinge arrangement are suitable for the gate being installed.

PRODUCT SPECIFICATIONS

Product type: Farm gate bolt-through hinge and latch set
Pack type: General Purpose Pack
Top hinge style: Through-post threaded hinge
Top hinge diameter: 16mm
Top hinge threaded length: 300mm
Backing plate: Included
Bottom hinge: Bolt through gudgeon
Latch type: Bolt-on droplatch
Material: Galvanised steel
Post compatibility: Suitable larger gate posts
Installation: Drilled holes for the top and bottom through-post hinges
Primary use: Hanging and securing rural farm gates
Gate included: No

FREQUENTLY ASKED QUESTIONS

What is a bolt-through gate hinge?

A bolt-through gate hinge has a threaded shaft that passes through a drilled hole in the gate post. A backing plate and mounting hardware secure the hinge on the opposite side, creating a strong through-post connection.

What size is the top gate hinge?

The top through-post hinge is 16mm in diameter with a 300mm threaded length.

What type of post is this hinge designed for?

This hinge set is designed for installation on a suitable gate post. The 300mm threaded length makes it particularly useful for larger posts, subject to the post’s actual dimensions.

How many holes are needed for the top hinge?

The top hinge requires one correctly positioned hole through the post. The hole must be drilled straight and sized appropriately for the 16mm threaded hinge.

Does this pack include a bottom hinge?

Yes. The pack includes a bolth through-in bottom gudgeon.

Does the pack include a gate latch?

Yes. It includes a bolt-on 12mm drop latch and matching catch.

Can the hinge position be adjusted?

The threaded top hinge allows its position to be adjusted during installation. This can assist with gate alignment and help achieve a smooth swing.

Is this hinge set rust-resistant?

The components are manufactured from galvanised steel to improve resistance to rust and corrosion. No outdoor steel product is completely corrosion-proof, and durability will depend on its environment and maintenance.

Does this product include the farm gate or post?

No. This pack contains the listed hinge and latch components only. The farm gate, gate posts and unlisted installation hardware are not included.

Can it be used for a heavy farm gate?

Suitability depends on the gate’s weight and length, the strength and size of the post, the hinge arrangement and the installation method. Seek professional advice when hanging an unusually large or heavy gate.

IMPORTANT INSTALLATION NOTE

Measure the gate, hinge eyes and post thickness before ordering. Ensure the post provides sufficient structural support and that the 300mm threaded length is suitable for the intended installation.

For safe operation, regularly check the hinge, latch, backing plate and mounting hardware for movement, wear, corrosion or damage.

Additional information